help me to understand a custom rifle build (updated 11/18)
Posted: Fri Nov 04, 2016 11:56 pm
I am looking at having Kreiger do a full fitting:
So If I send them the items they are requesting and get them to do the barrel, what else still needs to be done by someone else?
Items I am considering so far:
Stiller Predator action with 20 MOA rail - cut for Wyatt bottom metal
Krieger barrel 28" #17 varmint contour 1:8 twist in 7mm mag -- likely running 168 and 180 gr
Mcmillan A3-5 or just an A5 - not sure yet
Timney trigger - 533-16 1 lb its a two stage with 1.5#, then 1# -- very willing hear alternatives and why.
Wyatt bottom metal with 10 round mags
a good set of ring -- Have not determined which yet
Vortex PST 4x16x50 FFP
Harris or other quality / portable bipod
All kitted up it should weigh in at about 16#
https://www.kriegerbarrels.com/files/bo ... cedure.pdfFull Fitting:
Full fitting of your new Krieger Barrel to your receiver. This requires that you send us all of your parts which are necessary for the fitting. Click here to download our parts send-in check list. Fill this out and send it with your parts.
Price:
With Extractor Cut: $290
So If I send them the items they are requesting and get them to do the barrel, what else still needs to be done by someone else?
Items I am considering so far:
Stiller Predator action with 20 MOA rail - cut for Wyatt bottom metal
Krieger barrel 28" #17 varmint contour 1:8 twist in 7mm mag -- likely running 168 and 180 gr
Mcmillan A3-5 or just an A5 - not sure yet
Timney trigger - 533-16 1 lb its a two stage with 1.5#, then 1# -- very willing hear alternatives and why.
Wyatt bottom metal with 10 round mags
a good set of ring -- Have not determined which yet
Vortex PST 4x16x50 FFP
Harris or other quality / portable bipod
All kitted up it should weigh in at about 16#