BIT: Rifle Ballistic Shield

The place for general talk about gun, shooting, loading, camping, survival, and preparedness related tools and gear, as well as gear technology discussion, gear reviews, and gear specific "range reports" (all other types of gear should be on the back porch).
User avatar
JustinR
Trigger Junkie
Posts: 1852
Joined: Tue Aug 19, 2008 3:53 am
Location: DFW Texas, the last free place on earth

BIT: Rifle Ballistic Shield

Postby JustinR » Sat May 30, 2015 5:45 am

So it occurred to me that entry teams (SWAT) often have head and torso body armor, but unless they are wearing the heavy armored visors, they don't have any protection for their face. Would a clear ballistic shield in the shape of an upside-down U, that attached to the handguard rails of a rifle, be of any value? If any of you have seen the game Army of Two, they have a similar concept.

I haven't found much comparable, although THIS is close. All of the other rifle compatible shields are either full shields, or rolling barriers, whereas this would be designed to suppliment existing worn armor, while not restricting mobility.

Thoughts and comments on the usefulness/marketability of such a shield?
"The armory was even better. Above the door was a sign: You dream, we build." -Mark Owen, No Easy Day

"My assault weapon won't be 'illegal,' it will be 'undocumented.'" -KL

Greg
Probably Unemployed
Posts: 8121
Joined: Tue Aug 19, 2008 3:15 pm
Location: MO

Re: BIT: Rifle Ballistic Shield

Postby Greg » Sat May 30, 2015 11:18 am

I suspect that if you want ballistic protection you're better off attaching it to your body, rather than your weapon. Unless it's a crew served weapon, of course. :lol:

Think helmet with a visor. Putting an actual shield on your rifle is just going to make it harder for you to engage targets. And move through confined spaces. Malfunction drills could potentially become very entertaining.
Maybe we're just jaded, but your villainy is not particularly impressive. -Ennesby

If you know what you're doing, you're not learning anything. -Unknown
Sanity is the process by which you continually adjust your beliefs so they are predictively sound. -esr

User avatar
Jistuason
Newbie
Posts: 2
Joined: Mon Oct 19, 2015 2:24 am
Location: 123 street
Contact:

Re: BIT: Rifle Ballistic Shield

Postby Jistuason » Tue Apr 05, 2016 5:19 am

good Shit bro... I need one for my army of two loadout lol


_______________
wooden swords

User avatar
Jericho941
Good Christ I Need A Life
Posts: 5141
Joined: Sun Aug 24, 2008 9:30 am
Location: America

Re: BIT: Rifle Ballistic Shield

Postby Jericho941 » Tue Apr 05, 2016 5:31 am

Jistuason wrote:good Shit bro... I need one for my army of two loadout lol


Beat me to it, heh.

Amtwo_03.png
You do not have the required permissions to view the files attached to this post.

User avatar
JustinR
Trigger Junkie
Posts: 1852
Joined: Tue Aug 19, 2008 3:53 am
Location: DFW Texas, the last free place on earth

Re: BIT: Rifle Ballistic Shield

Postby JustinR » Tue Apr 05, 2016 11:09 am

Wow, this is such a zombie thread, I reached for my shotgun when I saw it!
"The armory was even better. Above the door was a sign: You dream, we build." -Mark Owen, No Easy Day

"My assault weapon won't be 'illegal,' it will be 'undocumented.'" -KL

Greg
Probably Unemployed
Posts: 8121
Joined: Tue Aug 19, 2008 3:15 pm
Location: MO

Re: BIT: Rifle Ballistic Shield

Postby Greg » Tue Apr 05, 2016 1:36 pm

JustinR wrote:Wow, this is such a zombie thread, I reached for my shotgun when I saw it!


Less than a year, it's still fresh!
Maybe we're just jaded, but your villainy is not particularly impressive. -Ennesby

If you know what you're doing, you're not learning anything. -Unknown
Sanity is the process by which you continually adjust your beliefs so they are predictively sound. -esr

User avatar
JAG2955
Active Shooter
Posts: 3044
Joined: Mon Aug 18, 2008 10:21 pm

Re: BIT: Rifle Ballistic Shield

Postby JAG2955 » Tue Apr 05, 2016 2:01 pm

I've heard of worse ideas.

No, I'm not implying that either is a terrible idea. They all have their merits and trade-offs.

BDK
Trigger Junkie
Posts: 1306
Joined: Sat Jun 21, 2014 12:14 am

Re: BIT: Rifle Ballistic Shield

Postby BDK » Wed Apr 06, 2016 1:10 pm

If it could be light enough, would this make more sense for snipers?

User avatar
Steamforger
On a list somewhere
Posts: 2739
Joined: Mon Aug 18, 2008 6:41 pm

Re: BIT: Rifle Ballistic Shield

Postby Steamforger » Wed Apr 06, 2016 2:57 pm

BDK wrote:If it could be light enough, would this make more sense for snipers?


They did this, sort of, in WW I. Ze Germans often sandbagged a steel plate with a firing port in a fixed position. The shooter had some ballistic protection and could aim and fire with some level of impunity.

The Brits started pulling their bullets and seating them backwards. This let them punch through the plate and even caused some spall on the back side, adding some liveliness to already being shot at. The constant oscillating development of new ideas and development of ways to counter the new ideas will be forever working against you. The good news is for at least some part, it also works against the other guy.

I think weight considerations take a back seat to camouflaging an obvious plate or shield. If a trained individual can detect and interpret something as small and as simple as the black dot created by a scope's objective or non-matching vegetation, then that plate will likely stand out in ways detrimental to longevity or collecting retirement.

The distances a military sniper operates at also negate the effectiveness of a shield from everything that isn't counter-sniper oriented or indirect fire. Better use can likely be made of terrain, cover, and displacement. Also, Hadji usually isn't making 600-1000 yard shots with his AK, though Syrian shooters seem to be able to fight through the "Inshallah" school of thought when returning fire and actually aim. They bear watching, IMHO.

Lastly, pounds are pain. It is apparently hard enough to get people to wear even SAPI plates they think they don't need. Lugging around a manhole cover on a 3 day lay up that has turned into 7 days.... That shield is going to get buried or drowned somewhere and combat lossed.

The best use would seem to be a fixed support weapon emplacement. Humvee turrets, the Mk 26 Mod whichever soft mount the Navy uses for perimeter defense, things like this. I'll grant that at least the Mk 26 plate could stand some improvements in both area and ballistic protection.

Personally, I'd rather carry something more useful like ammo or water.

User avatar
JAG2955
Active Shooter
Posts: 3044
Joined: Mon Aug 18, 2008 10:21 pm

Re: BIT: Rifle Ballistic Shield

Postby JAG2955 » Wed Apr 06, 2016 10:30 pm

BDK wrote:If it could be light enough, would this make more sense for snipers?


It would have to weigh nothing for them to be interested in taking it, and it would also have to blend in perfectly.

Scouting (and patrolling/comm/FAC/JTAC/recon) is just as, if not more important to sniping for a sniper. If they're detected, they're leaving.


Return to “Gear Talk and Tech”

Who is online

Users browsing this forum: No registered users and 7 guests