I picked this C7 upper up last week for $45.
It's a little ugly, but have been giving some thought on building an AR from mostly used parts. Just a junker that I don't have to worry about what it looks like. One I can just throw in the truck without a case and not worry about a scratch or two getting on it each time I take it for a ride.
Now I need to start looking for some used parts.
I want to use a barrel with a front sight tower, but not sure which stock I will go with. Maybe something free or cheap.
Anyone have some extra used parts that they would like to get rid of?
Starting on a Junkyard build
- Candyman
- Posts: 864
- Joined: Wed Sep 10, 2008 1:29 am
Starting on a Junkyard build
Do not relish to feel what the men that used these weapons felt when they saw the elephant. For the elephant has tusk and to see him is to have his tusk dig deep into your soul. You will always have a part of you that will be cold and empty.
- Denis
- Posts: 6570
- Joined: Fri Aug 22, 2008 5:29 am
Re: Starting on a Junkyard build
Sorry, don't have any AR parts to chip in.
Any idea of the history of that upper? It looks like someone stashed it in a swamp and forgot it. I love the rusty round-head screw holding the sight disk. Can't wait to see the Candyman magic happen...
Any idea of the history of that upper? It looks like someone stashed it in a swamp and forgot it. I love the rusty round-head screw holding the sight disk. Can't wait to see the Candyman magic happen...
- HTRN
- Posts: 12399
- Joined: Wed Aug 20, 2008 3:05 am
Re: Starting on a Junkyard build
Onside ring that most of the AR is aluminum, all it takes to look better than new is a paint job.
Have considered mebbe doing a triangular handgun Rd retro Build? Or perhaps a xm177, only in 300 Blackout? Of course that's gonna need a stamp..
Have considered mebbe doing a triangular handgun Rd retro Build? Or perhaps a xm177, only in 300 Blackout? Of course that's gonna need a stamp..
HTRN, I would tell you that you are an evil fucker, but you probably get that a lot ~ Netpackrat
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt
- Candyman
- Posts: 864
- Joined: Wed Sep 10, 2008 1:29 am
Re: Starting on a Junkyard build
My buddy dug the upper out of the mess that was his office at his house. When it flooded here in Louisiana, back in August, his house took on about four feet of water. It was under water for three days and was found about a week later while cleaning out his house. The upper has never been on a rifle, but there are a few marks from a charging handle latch.Denis wrote:Sorry, don't have any AR parts to chip in.
Any idea of the history of that upper? It looks like someone stashed it in a swamp and forgot it. I love the rusty round-head screw holding the sight disk. Can't wait to see the Candyman magic happen...
If it were an A1 upper I would spend the money to do a retro A1 build, but it's a C7 upper. So the plan it to build it cheap and ugly and use it as a truck gun.HTRN wrote:Onside ring that most of the AR is aluminum, all it takes to look better than new is a paint job.
Have considered mebbe doing a triangular handgun Rd retro Build? Or perhaps a xm177, only in 300 Blackout? Of course that's gonna need a stamp..
Do not relish to feel what the men that used these weapons felt when they saw the elephant. For the elephant has tusk and to see him is to have his tusk dig deep into your soul. You will always have a part of you that will be cold and empty.
- Durham68
- Posts: 1044
- Joined: Tue Aug 19, 2008 3:36 am
Re: Starting on a Junkyard build
I've got a mess of used handguards (various lenths), slings, grips, misc lower parts, stock assemblies, a couple beater scopes, and carry handle mounts. Much of it would definitely qualify as ugly. I can send pics and you tell me what you want. I'd rather see this stuff used in a build than try to sell it for pennies at a show.Candyman wrote: Anyone have some extra used parts that they would like to get rid of?
ETA: Candyman, what's your email? I don't see a link in your profile.
"Unattended children will be given an espresso and a puppy"
- Candyman
- Posts: 864
- Joined: Wed Sep 10, 2008 1:29 am
Re: Starting on a Junkyard build
Durham68
I just updated my profile so that you can email me.
LEE
I just updated my profile so that you can email me.
LEE
Do not relish to feel what the men that used these weapons felt when they saw the elephant. For the elephant has tusk and to see him is to have his tusk dig deep into your soul. You will always have a part of you that will be cold and empty.
- Durham68
- Posts: 1044
- Joined: Tue Aug 19, 2008 3:36 am
Re: Starting on a Junkyard build
Let me know if you got anything. I am emails from this site that I am sending emails to myself when I use the contact link in your profile.Candyman wrote:Durham68
I just updated my profile so that you can email me.
LEE
"Unattended children will be given an espresso and a puppy"
- 308Mike
- Posts: 16537
- Joined: Wed Aug 13, 2008 3:47 pm
Re: Starting on a Junkyard build
The site is configured to automatically send you a copy of the same email you send to someone else - unless you uncheck the box below the text entry box for the email. Look for the following text below the text entry box for the contents of your email.Durham68 wrote:Let me know if you got anything. I am emails from this site that I am sending emails to myself when I use the contact link in your profile.Candyman wrote:Durham68
I just updated my profile so that you can email me.
LEE
BOX Send a copy of this email to yourself.
POLITICIANS & DIAPERS NEED TO BE CHANGED OFTEN AND FOR THE SAME REASON
A person properly schooled in right and wrong is safe with any weapon. A person with no idea of good and evil is unsafe with a knitting needle, or the cap from a ballpoint pen.
I remain pessimistic given the way BATF and the anti gun crowd have become tape worms in the guts of the Republic. - toad
A person properly schooled in right and wrong is safe with any weapon. A person with no idea of good and evil is unsafe with a knitting needle, or the cap from a ballpoint pen.
I remain pessimistic given the way BATF and the anti gun crowd have become tape worms in the guts of the Republic. - toad
- Candyman
- Posts: 864
- Joined: Wed Sep 10, 2008 1:29 am
Re: Starting on a Junkyard build
Durham68
I emailed you a list but forgot to put A Delta ring on it. If you have one that is a little ugly, I could use it.
I emailed you a list but forgot to put A Delta ring on it. If you have one that is a little ugly, I could use it.
Do not relish to feel what the men that used these weapons felt when they saw the elephant. For the elephant has tusk and to see him is to have his tusk dig deep into your soul. You will always have a part of you that will be cold and empty.
- Durham68
- Posts: 1044
- Joined: Tue Aug 19, 2008 3:36 am
Re: Starting on a Junkyard build
Ahh. Thank you.308Mike wrote:The site is configured to automatically send you a copy of the same email you send to someone else - unless you uncheck the box below the text entry box for the email. Look for the following text below the text entry box for the contents of your email.Durham68 wrote:Let me know if you got anything. I am emails from this site that I am sending emails to myself when I use the contact link in your profile.Candyman wrote:Durham68
I just updated my profile so that you can email me.
LEE
BOX Send a copy of this email to yourself.
"Unattended children will be given an espresso and a puppy"