NOW, you have a cartridge....

The place to discuss ammunition, reloading, ballistics, loads, and chamberings.
User avatar
Steamforger
On a list somewhere
Posts: 2630
Joined: Mon Aug 18, 2008 6:41 pm

NOW, you have a cartridge....

Postby Steamforger » Fri May 05, 2017 2:34 am

I was at the local MoD today picking up powder. I grab 2 lbs every time I'm in the city. The guy behind the counter grabs me some W231 and IMR 4895.

He says "You usually get one or two 4895s. What are you using them in?"
I tell him "Mostly .308." and describe a couple of different loading methods I use depending on if I'm using components or beaking down and reloading surplus.

He then tells me a story of a local Russian guy that worked for Tula. He said the thing to do with 7.62x54R is to take 5 rounds. Pull the bullet from one, divide the powder into quarters, then add a quarter to each remaining round.

"NOW, you have a catridge."

I've seen some load data with IMR 4831 that uses 52.0 grains. Just spitballing a load I found on the intarwebs, 52 x 1.25 = a whopping 65 grains of powder. :shock:

Russians are certifiable.

User avatar
Vonz90
On a list somewhere
Posts: 2807
Joined: Fri Sep 19, 2008 5:05 pm

Re: NOW, you have a cartridge....

Postby Vonz90 » Fri May 05, 2017 2:24 pm

I guess it would be hot, but I can't figure it would be good for accuracy.

User avatar
HTRN
Probably Unemployed
Posts: 10544
Joined: Wed Aug 20, 2008 4:05 am
Location: Under your bed with a knife

Re: NOW, you have a cartridge....

Postby HTRN » Fri May 05, 2017 2:55 pm

You want accuracy, use h4350, or varget. They have the least variation in velocity due to temperature.
EGO partum , proinde EGO sum

Describing what HTRN does as "antics" is like describing the wreck of the Titanic as "a minor boating incident" ~ First Shirt

Interdum feror cupidine partium magnarum Europae vincendarum

User avatar
Gunnuts
Case Shiner
Posts: 303
Joined: Tue Aug 19, 2008 6:13 pm

Re: NOW, you have a cartridge....

Postby Gunnuts » Fri May 05, 2017 3:02 pm

Ah, the max power reloading technique practiced by squirrel turd Glock owners.

Keep adding powder until it blows the gun up, then reduce by a tenth of a grain. :P

User avatar
Jered
Good Christ I Need A Life
Posts: 6819
Joined: Wed Aug 20, 2008 2:30 am
Location: The Misty Mountains

Re: NOW, you have a cartridge....

Postby Jered » Sat May 06, 2017 12:56 am

If it's Mosin food, it probably won't hurt it.

I'd not recommend that to anyone, ever, though.
The avalanche has already started. It is too late for the pebbles to vote.

User avatar
g-man
Loose Cannon
Posts: 975
Joined: Tue Aug 19, 2008 5:40 pm
Location: The Puzzle Palace
Contact:

Re: NOW, you have a cartridge....

Postby g-man » Sat May 06, 2017 5:40 am

In a Mosin, it'd bring that "Kills at one end, maims at the other." concept to a whole new level. Ow.
Igitur qui desiderat pacem, praeparet bellum


Return to “Ammo and Reloading”

Who is online

Users browsing this forum: No registered users and 1 guest